Trumix 100 & Trumix
100 High Flow Used for single blend long draw beer systems.
Best for dispensing one style beer. Blends CO2 and N2 to your
specifications.
Size:
9.5" wide (including mounting flanges
x 10" high x 4.5" deep
Hook-Up:
Two inlet lines and one outlet line.
Fittings:
Panel comes with standard 1/4" female NPT fittings. Hose
barbs available at no additional costs. Specify size: 1/4",
5/16", and 3/8".
Accuracy and Flow Range:
Maintains accuracy of +/- 2% of full scale or better within
the flow range of .4 to 40 liters per minute (.85 to 85 cubic
feet per hour).
Standard Blender:
Up to 15 kegs/hr. dispensed.
High Flow Blender:
Up to 30 kegs/hr. dispensed. Used for
systems requiring only one blend of C02 and N2 that operate with
higher than usual gas flow.
Inlet Pressures:
55-150 psi, however, panel can be set
to match any conditions. Blender tuned at inlet pressure of existing
system. Standard 55 and 70 psi.
Outlet Pressures:
Adjustable outlet pressures of 0-60 psi.
The maximum outlet pressure will always be 10 psi lower than
the lowest inlet pressure. The panel can also be ordered with
outlet pressure set to custom ranges.
Trumix 200 & Trumix
200 High Flow Used for systems that dispense more than
one type of beer requiring two separate blends of CO2 and N2.
Size:
9.5" wide (including mounting flanges
x 10" high x 4.5" deep
Hook-Up:
Two inlet lines and two outlet lines.
Fittings:
Panel comes with standard 1/4" female NPT fittings. Hose
barbs available at no additional costs. Specify size: 1/4",
5/16", and 3/8"
Accuracy and Flow Range:
Maintains accuracy of +/- 2% of full scale or better within
the flow range of .4 to 40 liters per minute (.85 to 85 cubic
feet per hour).
Standard Blender:
Up to 30 kegs/hr. (15 kegs/hr. per blend)
dispensed.
High Flow Blender:
Up to 60 kegs/hr.(30 kegs/hr. per blend)
dispensed. Used for systems requiring two blends of C02 and N2
that operate with higher than usual gas flow.
Inlet Pressures:
55-150 psi, however, panel can be set
to match any conditions. Blender tuned at inlet pressure of existing
system. Standard 55 and 70 psi.
Outlet Pressures:
Adjustable outlet pressures of 0-60
psi. The maximum outlet pressure will always be 10 psi lower
than the lowest inlet pressure. The panel can also be ordered
with outlet pressure set to custom ranges.
