Direct Draw Keg Boxes
(Kegerators)
Back
to Keg Boxes
TDD2 Direct Draw Beer Dispenser
 Glacier’s direct draw beer dispensers are designed with enduring
quality and value. Our commitment to using the highest quality
materials and oversized refrigeration assures colder product temperatures
and
years of trouble free service.
- Oversized, factory balanced,
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C)
- Exterior - heavy duty, wear
resistant laminated black vinyl
front and sides. Matching black
aluminum back. All stainless
steel counter top.
- Interior - 300 series stainless
steel fl oor with 1/2" (13 mm)
reinforced lip and heavy gauge
galvanized steel walls. NSF-7
approved for pre-packaged and
bottled product.
- 3" (77 mm) diameter stainless
steel insulated beer columns.
Cold air is directed into beer
columns to reduce foaming and
maximize draft beer profi ts.
- Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
|
 |
Refrigeration System
- Factory engineered, self-contained, capillary tube system
using environmentally friendly (CFC free) 134A refrigerant.
- Extra large evaporator coil balanced with higher horsepower
compressor and large condenser; maintains cabinet temperatures
of 33°F to 38°F (.5°C to 3.3°C).
- Sealed, cast iron, self-lubricating evaporator fan motor(s)
and larger fan blades give merchandisers a more effi
cient low velocity, high volume airfl ow design. This unique
design ensures faster temperature pull down of warm product,
colder holding temperatures and faster recovery in high use
situations.
- Condensing unit accessed from behind front grill of unit
for easy cleaning and maintenance.
|
Cabinet Construction
- Exterior - heavy duty, wear resistant laminated black vinyl
front and sides. Matching black aluminum back. All stainless
steel counter top.
- Interior - 300 series stainless steel floor with 1/2" (13
mm) reinforced lip and heavy gauge galvanized steel walls.
- Insulation - entire cabinet structure and solid doors are
foamed-in-place using high density, CFC free, polyurethane
insulation.
- Welded, heavy gauge galvanized base rail dipped in rust
inhibiting enamel paint for corrosion protection inside and
out.
- 3" (77 mm) diameter stainless steel insulated beer
columns. Cold air is directed into beer columns to reduce
foaming and maximize draft beer profi ts.
|
Door
- Wear-resistant laminated black vinyl exterior with heavy
gauge galvanized steel liner.
- Each door fi tted with 12" (305 mm) long recessed
handle that is foamedin- place with a sheet metal interlock
to ensure permanent attachment.
- Positive seal doors.
- Magnetic door gaskets of one piece construction, removable
without tools for ease of cleaning.
- Door locks standard.
|
Model Features
- Evaporator is epoxy coated to eliminate the potential of
corrosion.
- Convenient 1/2" (13 mm) barbed T drain fitting located
on front of cooler.
- Designed to accommodate all types of beer kegs.
- Listed under NSF-7 for the storage and/or display of packaged
or bottled product.
|
Lighting
- Incandescent interior lighting.
|
Electrical
Unit completely pre-wired at factory and ready for final
connection to a 115/60/1 phase - 15 amp dedicated outlet.
Cord and plug set included
|
Dimensions
- 58-7/8 L x 27-1/8 D x 37 H
|
Back
to Keg Boxes
|
