Glacier’s direct draw beer
dispensers are designed with
enduring quality and value.
Our commitment to using the
highest quality materials and
oversized refrigeration assures
colder product temperatures
and years of trouble free
service.
Oversized, factory balanced,
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C).
Exterior - heavy duty, wear
resistant laminated black vinyl
front and sides. Matching black
aluminum back. All stainless
steel counter top.
Interior - 300 series stainless
steel fl oor with 1/2" (13 mm)
reinforced lip and heavy gauge
galvanized steel walls. NSF-7
approved for pre-packaged
and bottled product.
Two (2) 3" (77 mm) diameter
stainless steel insulated beer
columns. Cold air is directed
into beer columns to reduce
foaming and maximize draft
beer profi ts.
Entire cabinet structure and
solid doors are foamed-in-place
using high density, CFC free,
polyurethane insulation.
Refrigeration System
Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (.5°C to
3.3°C).
Sealed, cast iron, self-lubricating
evaporator fan motors and larger
fan blades give beer dispensers
a more effi cient low velocity, high
volume airfl ow design. This unique
design ensures faster temperature pull
down of warm product, colder holding
temperatures and faster recovery in
high use situations.
Condensing unit accessed from behind
front grill, slides out for easy cleaning
and maintenance.
Cabinet Construction
Exterior - heavy duty, wear resistant
laminated black vinyl front and sides.
Matching black aluminum back. All
stainless steel counter top.
Interior - 300 series stainless
steel floor
with 1/2" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
Insulation - entire cabinet structure and
solid doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
Welded, heavy duty galvanized base rail
dipped in rust inhibiting enamel paint
for corrosion protection inside
and out.
Two (2) 3" (77 mm) diameter stainless
steel insulated beer columns. Cold air
is directed into beer columns to reduce
foaming and maximize
draft beer profi ts.
Door
Wear-resistant laminated black vinyl
exterior with heavy gauge galvanized
steel liner.
Each door fi tted with 12" (305 mm)
long recessed handle that is foamed-in-
place with a sheet metal interlock to
ensure permanent attachment.
Positive seal doors.
Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
Door locks standard.
Model Features
Evaporator is epoxy coated to eliminate
the potential of corrosion.
Convenient 1/2" (13 mm) barbed
T drain
fitting located on front of cooler.
Designed to accommodate
all types
of beer kegs.
Listed under NSF-7 for
the storage
and/or display of packaged or bottled
product.
Lighting
Incandescent interior lighting.
Electrical
Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase, 15 amp dedicated
outlet. Cord and plug set included.
